HatreD
HatreD 100 is a custom hand built, all tube modern metal amplifier, without any compromises… “Built to Rust and Roll”
Features:
100W/50W(HatreD 50) tube power from 4 or 2 octal power tubes:
6l6/el34/kt77/6ca/kt66/kt88
4x12AX7/ECC83 preamp tubes.
1x12AT7/ECC81 preamp tube for the phase splitter (can be changed to ECC82, or ECC83 as well).
Two independent channels, with separate EQs (Bass, Middle, Treble).
Footswitchable lead boost on the dirty channel, for your solos, to cut through the mix.
Series or parallel effects loop, footwitchable true bypass on the HatreD100.
Global presence and feedback controls, additional hi-freq shaping on the lead channel as “HICUT”.
4, 8 & 16 Ohm output jacks.
Note: the Hatred Preamp has the exact same circuit as the head version until the pont of fx send.
HatreD Custom
HatreD is a custom hand built, all tube modern metal amplifier, without any compromises… “Built to Rust and Roll”
Additional features to the HatreD 100:
2×2 channel configuration, 2 separate EQ sections, 4 different voices with individual GAIN and VOLUME controls
The clean channel has lots of headroom with a crispy sound, light crunch when cranked, see CH1 solo sound sample
In crunch (aka Low Octane) mode it delivers a variety of classic rock sounds
The twin mode on the lead channel features the crushing tones of the Hatred head, as well the lower gain, but still punchy sounds of the Sludge territory
Global PRESENCE and FEEDBACK controls
Note: the Hatred Custom Preamp has the exact same circuit as the head version until the pont of fx send.
Sludge
The essence of the Hatred sound packed into a much more portable package
15W tube power from 2x6V6 power tetrodes – Sludge 15
30W tube power from 2x6L6 power tetrodes – Sludge 30
Both versions are cathode self biased.
Simple straightforward design with dedicated volume and gain controls for each channel and EQ controls shared between the 2 channels.
Gain and Volume controls for each channel.
Shared Bass, Middle, Treble, Presence controls. Presence acts as cut control, as no negative feedback applied.
4, 8 & 16 Ohm output jacks.
Warthog
A redesigned version of the Sludge curcuit with stoner’ish styles in mind. A brand new EL34 equipped power section. Nastier, dirtier sound, but with additional crispy clean non-master style clean channel.
Specifications:
45 watt tube power from 2xEL34/KT77 power pentodes
3xECC83 preamp tubes.
Cathode self biased poweramp.
Volume-Bass-Treble controls on clean channel.
Gain-Bass-Middle-Treble-Presence-Volume controls on the dirty channel.
4, 8 & 16 Ohm output jacks.
HatreD Preamp
Contains the lead and the clean channel of the infamous HatreD head with shared EQ section.
Features:
1U rack case – shared EQ version
2U rack case – independent EQ per channel version
4x12AX7/ECC83 tubes
Independent Gain and Volume controls
HatreD Custom Preamp
The preamp version of the 4 channel Hatred Custom head.
Features:
2×2 channel configuration, separate EQ sections, 4 different voices.
The clean channel has lots of headroom with a crispy sound
In crunch (aka Low Octane) mode it delivers a variety of classic rock sounds
The twin mode on the lead channel features the crushing tones of the Hatred head, as well the lower gain, but still punchy sounds of the Sludge territory
